Met Techs, the Environment and Science at the Joint Arctic Weather Stations, 1947-1972

Lowell Demond about to release a pilot balloon at Mould Bay, 1956. Lowell Demond personal collection, reproduced with permission.

Scroll this

Editor’s note: This is the third in a series of posts considering the intersection between environmental history and the histories of science, technology, and medicine. Previous posts can be found here.

This past January, Stephen Bocking’s “Landscapes of Science” post outlined several themes that “deserve more attention in the environmental history of Canadian science.” His exciting suggestions included examining how different environments impact scientific practices and material cultures, as well as how the use of science in the Canadian North after the Second World War shaped the state’s ability to “administer and exploit the region.”

The Canadian High Arctic provides unique opportunities to examine such questions and pose new ones. I am currently completing a history of the Joint Arctic Weather Stations (JAWS) with Whitney Lackenbauer. The stations were constructed between 1947 and 1950 largely at the behest and design of the American government. Canada and the US collaboratively operated a hub station at Resolute and smaller eight-man satellite stations at Mould Bay, Isachsen, Eureka, and Alert until 1972. Each of these civilian-run stations collected synoptic weather data by making surface observations and by flying weather balloons twice a day carrying radiosondes (which had to be manually tracked) or rawinsondes (which could be tracked via radio-direction finding equipment) to measure temperature, barometric pressure, humidity, and wind direction. The data these stations gathered were crucial to military planning, civilian meteorology, and transatlantic commercial aviation, as well as North America’s agriculture and forestry economies. Apart from the resupply season, these stations had little contact with the south. In fact, aside from a few hair-raising flights during the initial years of operations, aircraft did not land at the satellite stations during the dark period of the year until the 1960s.

The Joint Arctic Weather Stations. Map courtesy of True North Consulting.
The Joint Arctic Weather Stations. Map courtesy of True North Consulting.

My contributions to the book include analyzing how the High Arctic environment affected the stations’ scientific cultures. The JAWS program suggests the need for historians of science and environmental historians to pay more attention to technicians. Most scholarly research focuses on the ideas, activities, and impacts of scientists or engineers with undergraduate or advanced degrees. Other academics have begun to explore how “amateurs” (such as hobbyists) complicated scientists’ authority and contributed to environmental knowledge. Meteorological technicians (not scientists) conducted and encoded the JAWS programs’ synoptic meteorological observations. “Met techs,” as they were known, generally lacked undergraduate (let alone graduate) degrees. They were, however, professionally trained. Canadian Met Techs had to pass two courses offered by the Department of Transport. In the first three-month course, students learned how to conduct surface observations. The top students from this class were eligible to enroll in a rigorous four-month upper air observations course. Neither course included Arctic curriculum. Instead, graduates received this additional operational knowledge via on-the job training at the Joint Arctic Weather Stations from outgoing Met Techs.

JAWS personnel lived in a scientific culture. They valued the powers of observation as well as accuracy, consistency, and repetition. Yet they could not analyze the data they gathered; and they were not indoctrinated to desire the placeless ideal of laboratory cultures. Moreover, Met Techs resided at the stations for a year or more at a time. Scientists, by comparison, typically worked at the stations for weeks or a few months. These differences led JAWS personnel to more readily accept and adapt to local conditions. The JAWS program thus offers the opportunity to compare and contrast the scientific cultures constructed by scientists and technicians in an extreme environment.

When JAWS personnel understood the importance of their activities, only the most extreme situations frustrated their perseverance. At some stations, such as Alert, balloon releases were eased by consistently low wind speeds. At other stations such as Isachsen, however, high winds regularly endangered launches by pushing released balloons sideways, dragging and pulverizing the instrument package across the station grounds. Over time, JAWS personnel used different techniques to ensure successful launches in high winds, but the most common solution was the two-person launch. After filling the weather balloon in the shelter and checking its attached instrument package, one person walked upwind with the radiosonde and waited until his partner released the balloon. He then ran with the radiosonde until the balloon carried its cargo aloft. According to Howard Wessbecher, who served as both a supply clerk at Resolute and then an Executive Officer at Alert in the mid-1950s, “sometimes we tried two, three releases and I’d say… less than 5% of the time we didn’t make it” and have to concede that “hey, we can’t get her up.” In one extreme case, personnel at Isachsen launched five balloons, because the first four “burst upon hitting the sides of the door on the way out” under heavy winds.

Preparing to launch a balloon with radiosonde after preparing them in the inflation shed at Resolute, 1949. Alan Faller personal collection, reproduced with permission.
Preparing to launch a balloon with radiosonde after preparing them in the inflation shed at Resolute, 1949. Alan Faller personal collection, reproduced with permission.

Radiosondes, however, were not the only types of balloons used at the stations to make meteorological observations. Smaller pilot balloons were not as revealing as radiosondes, but they were less expensive, simpler to prepare, and useful for measuring cloud ceilings. Like radiosondes / rawinsondes, they could also be used to determine the wind’s direction and speed. Tracking the pibal flights forced observers to sit in a sheltered open-air dome and manipulate a metal theodolite with their bare hands at 30 or even 40 degrees below zero. During the dark period, observers hung a candle or battery-powered light below the pibal to enhance its visibility at altitude. From time to time, the observer would note three or four identical azimuth and elevation readings and realize that he had lost the pibal and was instead fixed on a star. “This always brought about a few curses!!” former Mould Bay and Eureka Met Tech Lowell DeMond subsequently recalled, because a second release was necessary if the balloon had not attained the required minimum altitude.

By the mid-1950s, station personnel began using excuses such as high winds or snow to avoid conducting pibals. Southern cries that the flights were essential led to their strict resumption. By the 1960s, however, the regularity of these flights wavered one again. According to Larry Petznick, who was Isachsen’s OIC from 1964-1965, station personnel continued “to question the value of pibal observations” and wondered “if the useage [sic] and end results from pibals are worth the amount of time and work put into them.” Nevertheless, Petznick assured Canadian and American authorities that “the Pibal program continues to slog on.” This seems to have been the last cry. Personnel who served at the JAWS stations in the late 1960s or early 1970s do not recall launching pilot balloons as part of a synoptic program.

Lowell Demond about to release a pilot balloon at Mould Bay, 1956. Lowell Demond personal collection, reproduced with permission.
Lowell Demond about to release a pilot balloon at Mould Bay, 1956. Lowell Demond personal collection, reproduced with permission.
Isachsen’s pibal dome, 1953. If you zoom in, you can see the theodolite inside the dome. Bill Nemeth personal collection, reproduced with permission.
Isachsen’s pibal dome, 1953. If you zoom in, you can see the theodolite inside the dome. Bill Nemeth personal collection, reproduced with permission.

JAWS Met Techs participated in scientific culture, innovated operating procedures that better suited their environments, and contributed to data sets. This culture led them to persevere with a host of environmental observations, including upper air flights, despite often harsh conditions. On rare occasions, however, different understandings about the utility of their activities led them to deviate from the wishes of southern scientists. Met Techs are, of course, not unique to the JAWS program. Canada and the United States employed them at weather stations across both countries. Technicians in other professions and programs also require attention. If social scientists do not recognize the contributions made by these men (and later women), they will struggle to understand the extent and nature of scientific culture, how the practical feasibility of government programs are assessed, and how non-scientists at remote outposts contributed to the expansion of the state.

The following two tabs change content below.
Daniel Heidt, PhD, is a postdoctoral fellow at the Frost Centre for Canadian Studies & Indigenous Studies (Trent University). His SSHRC funded research explores Canadian-American relations in the Arctic as well as how the development of gender, leadership, isolation, and scientific cultures at isolated stations impacted local operations.

10 Comments

Leave a Reply to Linden TannerCancel reply